Product Description

DKC-1B stepper motor controller

data Link: //wenku.baidu.com/view/c075be0516fc700abb68fc52.html

product description:

DKC-1B is my company's an economical stepper motor controller. The controller uses the original High-Speed Intelligent

chip as the platform, software on adhering to the original DKC-1 stability of reliability and strong anti-interference ability. Applicable to a variety of harsh environment of the factory site. At the same time with the addition of features so that the controller is more practical, convenient. The controller is adapted to the sensor control of the to-and-fro movement control, the fixed-length control, speed control and so on.

1. An ultra-wide voltage input: DC6-32V

2. The multiple protection function: with reverse polarity protection, over-voltage protection, over-current protection

3. Speed control: Single/two-speed speed control function, single Speed speed when the on-board speed external speed intelligent automatic switching

4. The acceleration and deceleration: Optimization of S-TYPE acceleration immediate stop/deceleration stop function

5. Output frequency: potentiometer speed can be output 20KHz pulse frequency.

6. The input/output: input and output all the optocoupler isolation, the output is a negative pulse. The input signal end of active.

7. The time delay function: in the reverse motor before 0.2 S-6S of delay time can be adjusted. VR2 potentiometer adjustment.

8. The back Origin function controller energization startup to the fact that it's defaulting to back to the origin of the action

control function

1: Immediately stop/deceleration stop function

2: Single/two-speed control function

3: Back to the origin of the function

immediately stop/deceleration stop function

immediately stop is receive a stop or commutation signal after the motor immediately stop or change direction. To achieve precise control

the deceleration stop is receive a stop or commutation signal after the motor starts to decelerate to a certain speed and stop, which can realizes the smooth stopping and reversing.

Single/double-speed control function

single speed control is the motor forward, inversion of the speed is the same on-board speed potentiometer, and an external potentiometer automatic switching,

the variable speed control is the motor forward, reverse speed of a single row is at the set. The slow feed quickly returned control requirements.

Go back to the origin function

start back to the origin of the function, that is, the controller power-on initialization is back to the origin, the controller can only forward, this time we trigger the forward limit reverse limit probably won't work. Until origin limit signal is received, the motor will stop, at this moment we are again starter motor is to enter the normal operating mode of. Of course, if we don't need to go back to the origin of the function, you can wire directly origin limit and short-circuited.

Control function setting :( dip switch for 1 0)

	immediately stop	the deceleration stop			single speed control	the variable speed control
S1	0	1		S2	0	1

2.Run mode settings:

	automatically back and forth electric mode	A single trigger mode	A single round-trip mode	jog mode
S3	0	0	1	1
S4	0	1	0	1

note:-1 control signal for 0-5V, the signal is a falling edge of the effective, the trigger signal must maintain 2.5US above

2 in the single speed control mode, the onboard potentiometer and an external potentiometer to automatically switch, an external potentiometer interface dangling, onboard potentiometer play speed, if connected to an external potentiometer (less than or equal to 10K) the control panel will automatically switch to the external potentiometer speed; in the variable speed control mode, the onboard potentiometer control forward speed, an external potentiometer control degree.

3 The controller after power on, the default launcher is back to the origin of the action. If you don't need to go back to the origin, may be the origin port directly with the common short-circuited.

In-kind shooting:

Free Ship 1pcs DKC-1B Industrial Stepper Motor Controller/Single-Axis Pulse Generator/Servo Motor PLC Speed X-0.24

Specifications

Product Description