Product Description

Features

Based on T5L1, running DGUS II system, commercial grade.
3.7-inch, 240*960 pixels resolution, 16.7M colors, IPS-TFT-LCD, Wide viewing angle
TTL/RS232 interface; 10Pin_1.0mm connection wire;
Download via SD card or on-line serial port;
Dual Development System:DGUSⅡ/TA(Instruction set);
With GUI&OS dual-core,GUI with rich controls,DWIN OS kernel is open to the user for the second-development,via DWIN OS language or C51.
Arduino UNO and DWIN 3.7 inch display video link: //www.youtube.com/watch?v=ugS3rKBZVVc&t=1888s

Specifications

Display parameters
LCD Type		IPS, TFT LCD
Viewing Angle		Wide viewing angle,85°/85°/85°/85°(L/R/U/D)
Resolution		240×960 pixels (support 0°/90°/180°/270°)
Color		24-bit 8R8G8B
Active Area (A.A.)		22.9mm (W)×91.4mm (H)
Backlight Mode		LED
Backlight Service Life		>20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness		WTC:350nit WTR:300nit WN:400nit
Brightness Control		0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)

Serial interface parameters
Mode	UART2: ON=TTL/CMOS; OFF=RS232 UART4: ON=TTL/CMOS; OFF=RS232 (Only available after OS configuration)
Voltage Level	Test Condition		Min	Typ	Max	Unit
	Output 1, Iout = -4mA		2.7	3.2	-	V
	Output 0, Iout = 4mA		-	0.1	0.4	V
	Input 1		2.4	3.3	5.5	V
	Input 0		0	-	1.0	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable	10Pin_1.0mm

Electrical specifications
Rated Power		<5W
Operating Voltage		4.5~5.5V, typical value of 5V
Operating Current		150mA	VCC=5V, max backlight
		80mA	VCC=5V, backlight off
Recommended power supply: 12V 1A DC

Operating environment
Operating Temperature		-20℃~70℃(5V @ 60% RH)
Storage Temperature		-30℃~80℃
Conformal coating		None
Operating Humidity		10%~90%RH, typical value of 60% RH

Dimensions
Form Factor		WTC:38.0mm (W)×116.0mm (H)×11.0mm (T) WTR:38.0mm (W)×116.0mm (H)×11.0mm (T) WN:38.0mm (W)×116.0mm (H)×9.3mm (T)
Net Weight		WTC:40g WTR:35g WN:30g

FAQ

Question 1:

How can I start development with a DWIN LCD Module? Can I assemble it directly on my machine?
Answer:

No, you should update the program to LCD at first, and then assemble it.
Step 1, check the software platform of the screen, it mentioned in datasheet.
Step 2, use the correct development SDK (different platform use different SDK) to finish developing.
Step 3, update software program and test
Step 4, when test OK, assemble it on machine.

Question 2:

What industries are DWIN LCD used in?
Answer:

Beauty machine, Physical therapy, Health and fitness, Medical treatment, Air treatment, Air control, Transportation (Car &ship instruments), instruments and apparatus automation, Electricity, Water treatment, IC design and manufacture, Kitchen appliances (Juicer, oven, ice machine, ice-cream machine, kitchen ventilator), New energy(Photovoltaic, Wind electricity, Charging Pile), Household appliances…

Question 3:

Does DWIN product need a MOQ when purchase?
Answer:

No MOQ for standard product.

Question 4:

Will DWIN have online technical support?
Answer:

Yes,of course, below ways you can get technical support.

- Whatsapp: +86 19192113166
- Customer service email: dwinhmi@dwin.com.cn

- DWIN Developer Forum://forums.dwin-global.com/

- International website://www.dwin-global.com/

- Development tool://www.dwin-global.com/tool-page/

- Development guide://www.dwin-global.com/development-guide/

- DGUS video tutorial://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/
- Leave messages to us on Aliexpress.

3.7 Inch Bar LCD 240*960 Pixels Resolution 16.7M Colors HMI IPS TFT LCD Display Screen Lcd Modules DMG96240C037_03W

Specifications

Product Description