DMG10600T101_09W
Display parameters |
LCD Type | IPS, TFT LCD |
Viewing Angle | Wide viewing angle,85°/85°/85°/85°(L/R/U/D) |
Resolution | 1024×600 pixels（0°/90°/180°/270°） |
Color | 16.7M color (24-bit 8R8G8B) |
Active Area (A.A.) | 222.72mm (W)×125.3mm (H) |
View Area (V.A.) | - |
Backlight Mode | LED |
Backlight Service Life | >30000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness) |
Brightness | WTC:450nit
WTR:400nit
WN:500nit |
Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range) |
|
Serial interface parameters |
Mode | UART2: ON=TTL/CMOS; OFF=RS232
UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)
|
Voltage Level | Test Condition | Min | Typ | Max | Unit |
Output 1, Iout = -4mA | 4.78 | 5.0 | - | V |
Output 0, Iout = 4mA | - | - | 0.4 | V |
Input 1 | 2.5 | 5.0 | - | V |
Input 0 | - | - | 1.0 | V |
Baud Rate | 3150~3225600bps, typical value of 115200bps |
Data Format | UART2: N81
UART4: N81/E81/O81/N82 , 4 modes (OS configuration) |
Interface Cable | 8Pin_2.0mm |
|
Electrical specifications |
Rated Power | <6W |
Operating Voltage | 9-36V, typical value of 12V |
Operating Current | 490mA | VCC=12V, max backlight |
150mA | VCC=12V, backlight off |
Recommended power supply: 12V 1A DC |
|
Operating environment |
Operating Temperature | -20℃~70℃(12V @ 60% RH) |
Storage Temperature | -30℃~80℃ |
Conformal Coating | Yes |
Operating Humidity | 10%~90%RH, typical value of 60% RH |
|
ESD Test |
Test temperature: 25°C. Test humidity: 50%RH.
Test process: the product was placed on the test bench to perform contact and air discharge in turn of the serial screen iron frame and display area . During the experimental process, it was observed whether the screen is dead, black, white, splash, or reboot. According to the experiment results,the performance is in line with the criteria GB/T 17626.2 B level and above. |
Discharge Type | Discharge Value | Result |
Contact discharge | ±6KV | Normal operation |
Air discharge | ±8KV | Normal operation |
|
Dimensions |
Form Factor | WTC:257.8mm (W)×148.1mm (H) ×15.38mm (T)
WTR:257.81mm (W)×148.08mm (H) ×15.1mm (T)
WN:257.8mm (W)×148.1mm (H) ×13.6mm (T) |
Installation Dimensions | Positioning hole: 236.0(+0.3mm)×144.0(+0.3mm) |
Net Weight | WTC:560g
WTR:530g
WN:500g |
Question 1:
How can I start development with a DWIN LCD Module? Can I assemble it directly on my machine?
Answer:
No, you should update the program to LCD first, and then assemble it.
Step 1, check the software platform of the screen, mentioned in the datasheet.
Step 2, use the correct development SDK (different platforms use different SDKs) to finish developing.
Step 3, update the software program and test
Step 4, when test OK, assemble it on the machine.
Question 2:
What industries are DWIN LCD used in?
Answer:
Beauty machines, Physical therapy, Health and fitness, Medical treatment, Air treatment, Air control, Transportation (Car &ship instruments), instruments and apparatus automation, Electricity, Water treatment, IC design and manufacture, Kitchen appliances (Juicer, oven, ice machine, ice-cream machine, kitchen ventilator), New energy(Photovoltaic, Wind electricity, Charging Pile), Household appliances…
Question 3:
Does DWIN product need a MOQ when purchase?
Answer:
No MOQ for standard product.
Question 4:
Will DWIN have online technical support?
Answer:
Yes, of course, below are ways you can get technical support.
- Whatsapp: +86 19192113166
- Customer service email: dwinhmi@dwin.com.cn
- DWIN Developer Forum://forums.dwin-global.com/
- International website://www.dwin-global.com/
- Development tool://www.dwin-global.com/tool-page/
- Development guide://www.dwin-global.com/development-guide/
- DGUS video tutorial://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/
- Leave messages to us on Aliexpress.
