DWIN 7.0 Inch Display LCD HMI Intelligent Module, Resistive Touch Panel, 800*RGB*480, Consumption Grade - DMG80480L070_01WTR
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- DWIN
- Origin
- Mainland China
- Display Mode
- None
- High-concerned chemical
- None
- Resolution
- 800x480, 800*480
- Model Number
- DMG80480L070_01WTR
- Type
- TFT
- is_customized
- Yes
- Colors
- 16.7M
- LCD Type
- TN-TFT-LCD
- Viewing Angle
- 70°/70°/50°/70°
- Brightness
- 200 nit
- User interface
- 8Pin_2.0mm
Product Description
Features
T5L platform , 7.0 Inch, 16.7M Colors, 800*480 Pixel TFT LCD
Resistive touch panel
TTL/RS232 available
8Pin_2.0mm connection wire
Two Development modes: DGUS II/ TA(Instruction set)
Support animation ,data ,text ,curve display and so on ,without any code
Independent GUI and OS kernal ,OS can be programmed by DWIN OS language or Keil C51
Display parameters | ||||||
LCD Type | TN, TFT LCD | |||||
Viewing Angle | Normal viewing angle, 70°/70°/50°/70° (L/R/U/D) | |||||
Resolution | 800×480 pixels (0°/90°/180°/270°) | |||||
Color | 24-bit 8R8G8B | |||||
Active Area (A.A.) | 153.8mm (W) ×85.6mm (H) | |||||
Visual Area (V.A.) | 156.4mm (W) ×88.5mm (H) | |||||
Backlight Mode | LED | |||||
Backlight Service Life | >10000 hours (Time of the brightness decaying to 50%on theconditionofcontinuous working with the maximum brightness) | |||||
Brightness | 200nit | |||||
Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30%of themaximumbrightness, flickering may occur and is not recommended to use in thisrange) | |||||
Serial interface parameters | ||||||
Mode | Mode is determined by Jumper: (Default to TTL/CMOS mode) | |||||
Voltage Level | Test Condition | Min | Typ | Max | Unit | |
Output 1, Iout = -4mA | 4.78 | 5.0 | - | V | ||
Output 0, Iout = 4mA | - | - | 0.4 | V | ||
Input 1 | 2.5 | 5.0 | - | V | ||
Input 0 | - | - | 1.0 | V | ||
Baud Rate | 3150~3225600bps, typical value of 115200bps | |||||
Data Format | N81 | |||||
Interface Cable | 8Pin_2.0mm | |||||
Electrical specifications | ||||||
Rated Power | <5W | |||||
Operating Voltage | 6.0~15.0V, typical value of 12V | |||||
Operating Current | 200mA | VCC=12V, max backlight | ||||
80mA | VCC=12V, backlight off | |||||
Recommended power supply: 12V 1A DC | ||||||
Operating environment | ||||||
Operating Temperature | -20℃~70℃(12V @ 60% RH) | |||||
Storage Temperature | -30℃~80℃ | |||||
Conformal Coating | None | |||||
Operating Humidity | 10%~90%RH, typical value of 60% RH | |||||
FAQ
Question 1:
How can I start development with a DWIN LCD Module? Can I assemble it directly on my machine?
Answer:
No, you should update the program to LCD at first, and then assemble it.
Step 1, check the software platform of the screen, it mentioned in datasheet.
Step 2, use the correct development SDK (different platform use different SDK) to finish developing.
Step 3, update software program and test
Step 4, when test OK, assemble it on machine.
Question 2:
What industries are DWIN LCD used in?
Answer:
Beauty machine, Physical therapy, Health and fitness, Medical treatment, Air treatment, Air control, Transportation (Car &ship instruments), instruments and apparatus automation, Electricity, Water treatment, IC design and manufacture, Kitchen appliances (Juicer, oven, ice machine, ice-cream machine, kitchen ventilator), New energy(Photovoltaic, Wind electricity, Charging Pile), Household appliances…
Question 3:
Does DWIN product need a MOQ when purchase?
Answer:
No MOQ for standard product.
Question 4:
Will DWIN have online technical support?
Answer:
Yes,of course, below ways you can get technical support.
- Whatsapp: +86 19192113166
- Customer service email: dwinhmi@dwin.com.cn
- DWIN Developer Forum://forums.dwin-global.com/
- International website://www.dwin-global.com/
- Development tool://www.dwin-global.com/tool-page/
- Development guide://www.dwin-global.com/development-guide/
- DGUS video tutorial://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/
- Leave messages to us on Aliexpress.
Product information last updated on January 12, 2026