Electric Vehicle Brushless Motor Controller 3000W-5000W 48V 60V 64V 72V 84V 100A For E-Bike Motor Motorcycles Spare Accessories
You will be redirected to AliExpress to complete your purchase
Specifications
- Brand Name
- NONE
- High-concerned chemical
- None
- Origin
- Mainland China
- Type
- Controller
- voltage
- 48V/52V/60V/72V/84V
- power
- 3000W-5000W
- maximum current
- 100A
- brushless controller
- Dual-mode 24 tubes
- use
- electric bike/tricycle/scooter/brushless motor
Product Description
48V-84V 3000W-5000W 60A-100A brushless controller work with hall sensor/not have hall sensor
Name: Intelligent dual-mode brushless controller
Power: 3000W-5000W
Voltage: 48V-84V
Current limit: 60A-100A
Undervoltage: automatic identification
MOS tube: 24mos
Phase: automatic identification (60 ° / 120 ° all can fit)
Brakes: low brake / high brake
Size: 225 * 118 * 68 mm
Brushless controller function：
1.low level brake
2.speed control handle（throttle）
3.cruise
4.hall
5.reverse gear
7.high level brake
8.intelligent recognition（self-learning）
9.phase meter
10.hall meter
11.three speed gear
12.electric door lock（must connect）
13.anti-theft alarm signal（is connect to alarm，if not have alarm，not need connect）
14.anti-theft alarm power（is connect to alarm，if not have alarm，not need connect）
15.multiple data meter
16.motor phase line
17.battery
How to connect controller？
1.connect the motor phase line(color to color）
2. connect the battery line(red:battery+ , black:battery-)
3. connect the controller throttle to throttle and need color to color connect,
connect controller electric door lock to throttle electric door lock
（if throttle not have electric door lock, controller electric door lock docking,
so controller electric door must connect ）
4. connect the hall line(if motor without hall line, don't need connect)
5.off power,let two intelligent recognition lines connect together,open power,then the wheel will forward or reverse.
(1.if wheel forward ,Separate the intelligent recognition line.
2.if wheel reverse, Separate the intelligent recognition line. Let intelligent recognition line connect together again,if wheel forward ,Separate the intelligent recognition line.)
This step needs to be effective within 2 minutes after the power is turned on. If the timeout occurs, please turn off the power and then turn it back on before proceeding with these steps.
NOTE:when use throttle control speed,two intelligent recognition line must separate.
6.other functions can be connected as needed.
Pros & Cons
Pros
- Wide voltage and power range to fit most high-power electric vehicle setups
- Dual-mode compatibility with both hall and non-hall sensor brushless motors
- 100A maximum current for reliable performance with large motors
- Free of high-concern chemicals for safe use
Cons
- No included installation hardware or instructions, requiring separate purchases
- Only compatible with brushless motors, not brushed electric vehicle motors
- No official brand name listed, so no established warranty support
- Automatic phase identification may not work with all custom motor setups
Common Questions
Are there any high-concern chemicals used in this motor controller?
This controller does not contain any high-concern chemicals as noted in the product specifications.
What voltage and power ranges does this controller support?
It supports voltages from 48V to 84V, power outputs between 3000W and 5000W, and a maximum current of 100A.
What types of electric vehicles is this controller compatible with?
It is designed for use with brushless motors in electric bikes, tricycles, scooters, and electric motorcycles.
What special features does this controller have?
It is a dual-mode 24-tube brushless controller that works with both hall sensor and non-hall sensor motors, and automatically identifies 60°/120° phase angles.
Where is this controller manufactured and shipped from?
This controller is made in Mainland China with standard international shipping options available.
Product information last updated on December 15, 2025