Flysky FS-I6S FS I6S 10CH 2.4G RC Quadcopter Transmitter Controller Set w/Receiver FS-iA6B or FS-IA10B w/Change Mode Gift

Overview:The FS-i6S transmitter and FS-iA6B receiver constitute a 10 channel2.4GHz AFHDS 2A digital proportional computerized RC System. This systemsupports quadcopters.The AFHDS 2A (Automatic Frequency Hopping Digital System SecondGeneration) developed and patented by Flysky is specially developed forall radio control models.Offering superior protection againstinterference while maintaining lower power consumption and high reliablereceiver sensitivity,Flysky's AFHDS technology is considered to be oneof the leaders in the RC market today.

Description:

Brand Name: Flysky

Note: If this transmitter bind with the FS-iA10B receiver,it can extend to 10 channel.(This transmitter is only compatible with Flysky 2A system receiver)

Note:this is self-centering version, we give a free throttle modificationparts as gift, if you need to modify the throttle, you can do it byyourself. And the this version comes without monitor holder, if you needit, please order from this page.This transmitter comes wtih 6 channels, it need to modify by yourself if you wanna it be 10 channel.

Specifications:

Features:Full touchscreen interface,more convenient to controlBidirectional CommunicationCapable of sending and receiving data,each transmitter is capable ofreceiving data from temperature,altitude and many other types ofsensors,servo calibration and i-BUS Support.Multi-channel Hopping FrequencyThis systems bandwidth ranges from 2.4055GHz to 2.475GHz. This band isdivided in 140 channels. Each transmitter hops between 16 channels (32for Japanese and Korean versions) in order to reduce interference fromother transmitters.Omni-directional Gain AntennaThe high efficiency Omni-directional high gain antenna cuts down oninterference,while using less power and maintaining a strong reliableconnection.Unique ID Recognition SystemEach transmitter and receiver has its own unique ID. Once thetransmitter and receiver have been paired,they will only communicatewith each other,preventing other systems accidentally connecting to orinterfering with the system's operation.Low Power ConsumptionThe system is built using highly sensitive low power consumptioncomponents,maintaining high receiver sensitivity,while consuming aslittle as one tenth the power of a standard FM system,dramaticallyextending battery life.New Firmware Features:New (Trims) functionNew (Rate/Exp.) functionNew(Throttle curve) functionNEW(Throttle mode) functionNew(models) function, supports 5 modes groupsNew Context aware reset functionNew low signal alarm functionA8S:The FS-A8S is a compact 1-way receiver designed for multi-rotoraircraft. It uses the AFHDS 2A(Automatic Frequency Hopping DigitalSystem) protocol, supports standard PPM output and has i-BUS support forup to 18 channels.Description:Brand Name:FlyskyItem Name:FS-A8S ReceiverChannels: PPM 8CH, i-BUS 18CHModel type: Multi-rotorFrequency range: 2.408-2.475GHzBand width: 500KHzBand number: 135RX Sensitivity: -92 dBm2.4GHz system: AFHDS 2AModulation type: GFSKDSC port: PPM/i-BUS/S.BUSTransfer method: FHSSData output: 1.5mm*3 Pin PPM/i-BUS/S.BUSAntenna length: 26mm (Not including brass contacts)Input power supply: 4.0-8.4VDisplay method: LEDNo ground interference ( Transmitting and receiving 1 m from the ground): >300mWorking current: 40mAEach channel data: depend on the transmitterChannel delay: <15mSSize: 20*14*5.3mmWeight: 1.2gCertificate: CE0678, FCCID: N45ZA8S00Compatible Transmitter: Compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2FIA10B:Description:Brand Name: FlyskyItem Name: FS-iA10BChannel: 102.4G Mode: The second generation of an enhanced version of the automatic FM digital systemAntenna Length: 26mm * 2 (dual antenna)Input Power: 4.0-6.5V DCWeight: 19.3gSize: 51mm*34mm*15mmColor: Blacki-Bus Interface: YesData Acquisition Interface: YesModel Type: Airplane / Glider / HelicopterCompatible Transmitter: Compatible with FS-i4, FS-i6,FS-i6S, FS-i10,FS-iT4S

Item name: FS-RX2A Pro V1 receiverChannel: 10(IBUS), 8(PPM)RF Range: 2.408-2.475GHZNumber of bands: 135RX Sensitivity: -92dBm2.4GHz protocol: AFHDS 2ASignal output: IBUS, PPMAntenne length: 33mmPower input: 5.0-20VControl distance: 500m+Current: 30MASize: 12*15mmWeight: 0.9g

Item name: Flysky FS2A 4CH Receiver

Channels: 4CH

Output signal: PWM

Frequency range: 2.408-2.475GHZ

Band width: 135

Receiver sensitivity: -92DBM

2.4G mode: AFHDS 2A

Failfe: Yes

Supply voltage: 3.3-10V

Distance: 400+ meters

Working current: 20MA

Dimensions: 11 * 25MM

Weight: 0.9 grams

Item Name: Flit10 RXChannel: 102.4G Mode: The second generation of an enhanced version of the automatic FM digital systemAntenna Length: 10mm * 2(dual antenna)Input Power: 4.0-6.5V DCWeight: 3.1gSize: 25mm*15.5mm*5.5mmColor: BlackSignal Output: IBUSTelemetry: YesRemote Distance: 500mSupport Betaflight / INAV IBUS TelemetryModel: Fli14+Item Name: 2.4G 14CH Compatible Flysky AFHDS-2A Receiver

Channel: 14CH

Protocol: AFHDS-2A

2.4G Mode: The second generation of an enhanced version of the automatic FM digital system

Antenna Length: 70mm (Dual Antennas)

Input Voltage: 4-6.5V DC

Weight: Only 1.7g

Size: 25x15x5mm

Color: Black

Signal Outpu: IBUS

RSSI Output: Channel14

No ground interference ( Transmitting and receiving 1 m from the ground): more than 500m

Note: the transmitter comes without the holder