Radiolink F722 Flight Control ICM42688 Gyro 128MB Black Box 3-6S 3.3V/4.5/5V/12V With 55A 4-IN-1 ESC For Fixed-wing Helicopter

Radiolink F722 Flight Control ICM42688 Gyro 128MB Black Box Built-in
analog mapping OSD with 55A 4-IN-1 ESC For Fixed-wing Helicopter
Flying-wing

F722FC Features:
1. High Configuration:
STM32F722RET6 master, ICM42688 gyroscope, SPL06-001 barometer 128MB
flight log data storage, MPS brand MP2491C switching power supply chip.
2.
Optimal PCB layout and alignment: repeated optimization of PCB layout
alignment, to achieve the perfect combination of high current and low
noise, to ensure the accuracy of the sensor.
3. Multi-model
transmission support: standard Dali 6pin transmission interface, snail
transmission interface, built-in analog transmission OSD.
4. 3.3V/4.5/5V/12V multi-voltage power supply. 12V transmission power supply can be turned on and off by remote control.
5.
Rich interfaces. Support eight-way motor X8 models. Standard sockets
and pads all lead out, convenient for users with different needs.
6.
Support all kinds of mainstream throttle signals to support the ESC
information back to the perfect support for two-way DShot digital
throttle communication, OneShot and ordinary PWM signals.
7. Built-in
OSD module, one-step parameterization, F722 integrated OSD chip,
without external OSD module, you can directly set the OSD parameters in
the flight control parameterization software and RC, real-time graphical
display of OSD information, such as the direction of flight and the
position of the aircraft.

ESC Features:
1. ESC suse EFM8BB21F16G MCU, pipelined 8-bit C8051 core with 50 MHz maximum operating frequency.
2. Supports firmware1: Bluejay, A-H-30 (Using Bluejay configurator).
3. Supports firmware2: BLHeli-S,A-H-30 (Using BLHeliSuite).
4. Simplified and practical 4 in 1 ESC, extremely high cost performance ratio.
5. Dedicated 3in1 drivers, makes the start more smooth.ESC maximumspeedis limitedto 500k eRP M.
6.
Firmware is designed forsuperior performance in multirotors, and
useshardware generated motor pwm forsmooth throttle response and
silentoperation.
7. Built in current meter and Vbat battery voltage output.
8. Silicon spacer forsupporting could reduce the effect of vibration, makesthe flight more stable.
9. Bluejay firmware supports Dshot300 & Dshot600.
10.
BLHeli-S code supports regular 1-2ms pulse width input, as well
asOneshot125 , Oneshot42 and Multishot , supports all Dshot .
11.
Damped light does regenerative braking, causing very fast motor
retarda-tion, and inherently also does active freewheeling (BLHeli-S
firmware).
12. Supports higher powerload, more suitable for violent flight of racing drone.

Description:
F722
Flight controller: has been designed for optimal control of flight,
which allows you to have more control over the flight. Supported models:
fixed-wing, helicopter, flying wing, 2-8 axis multi-rotor airplanes
including X8 models, and various types of user-made multi-rotor models.


ESC Specifications:
Model:BLS-04 4in1
Con. Current:45A~65A(subject to speclfic model)
BEC: No
LiPo cells:3-6S
Weight:16 .2g
Size:45x41x5.8mm
Mounting:30.5x30.5mm,M3
Configurator:Bluejay configurator or BLHeliSuite
Firmware :A-H-30
Application:170-450 multi-rotors

FC Specifications:
Name:  F722 flight controller
Main Processor: STM32F722RET6
Gyro: ICM42688
barometer: SPL06-001
Barometer: BMP280
Black Box: 128MB flight log data storage
Switching power supply chip: MP2491C
Multi-voltage power supply: 3.3V/4.5/5V/12V
Weight: 9.5g for single F722 flight controller
Ounting hole distance: 30.5*30.5mm
OSD Chip: AT7456E
Motor Channel: M1-M8
DJI sky terminal plug-in: support
Analog Mapping Inline: Support
Betafight Camera Adjustment Pad: Supported
Voltage scaling: 110
Number of serial ports: 5 sets of serial ports: Supported
ESC Operational Test Input: Support
12C: Supported
LED pads: Supported
Buzzer Pad: Support
RSSI signal pinout: Support
Firmware type: Betaflight
Firmware Name: RADIOLINKF722
USB Port: 1(Type-c)
Controller-by-Controller Signal (RC In port): SBUS/CRSF
Mapping OSD: Support, built-in mapping OSD module
Supported ESC protocols: PWM/Bi-directional Dshot/Oneshot
Power input: 3-6S
BEC: 3.3V/300mA;4.5V/500mA;5V/3A;12V/3A
12V BEC Switch: Supported (USER1 setting)
Supported
models: fixed-wing, helicopter, flying wing, 2-8 axis multi-rotor
airplanes including X8 models, and various types of user-made
multi-rotor models.
Operating temperature: -30~85-C

Note:
Only the above package content, other products are not included.
1.Due
to the difference between different monitors,the picture may not
reflect the actual color of the item. We guarantee the style is the same
as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!

Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.

After purchase:
1.If you are satisfied,please express your use feeling.
2.Please
contact us before you are going to give us bad review. We are helpful
and will solve the problems. If you receive a defect item,please contact
us at once with item picture or video.